|
|
|
|
5 DIAMOND DUST HOLE SAW for TILE GLASS MARBLE HOLESAW 3/4", 1", 1-3/16", 1-3/8", 1-5/8"
|
MSRP: $0.00
Your Price: $39.95
Shipping: N/A
Manufacturer: Anytime Tools
Prices subject to change. Please verify price during checkout.
|
|
5 DIAMOND DUST HOLE SAW for TILE GLASS MARBLE HOLESAW 3/4", 1", 1-3/16", 1-3/8", 1-5/8" Features
|
Sizes (Shank diameter: 1/4"): 3/4", 1", 1-3/16", 1-3/8", 1-5/8"
Excellent results in glass, marble, slate, and tile.
Segmented design works better and lasts longer.
The diamond coating on these saws give superior performance and life.
Note: To prolong the life of these bits, use on a low speed with coolant (water/oil)
|
|
|
Related 5 DIAMOND DUST HOLE SAW for TILE GLASS MARBLE HOLESAW 3/4", 1", 1-3/16", 1-3/8", 1-5/8" Products
|
5 for SAW TILE HOLE 1", DUST 1-3/16", 1-5/8" DIAMOND HOLESAW 3/4", MARBLE GLASS 1-3/8",
MARBLE HOLESAW 5 HOLE 1-5/8" GLASS DIAMOND SAW 1-3/8", 1", DUST 3/4", TILE 1-3/16", for
1", SAW 1-5/8" MARBLE HOLE HOLESAW DIAMOND 1-3/8", DUST 5 3/4", 1-3/16", for TILE GLASS
1-3/16", SAW 1-5/8" 1", MARBLE 1-3/8", GLASS DIAMOND HOLE HOLESAW 3/4", TILE for 5 DUST
3/4", 5 GLASS MARBLE 1-3/8", TILE 1", 1-5/8" DUST HOLE for HOLESAW 1-3/16", DIAMOND SAW
DUST for 1-5/8" 1", HOLESAW DIAMOND TILE GLASS 1-3/16", 3/4", 5 SAW MARBLE 1-3/8", HOLE
|
|
|
Additional 5 DIAMOND DUST HOLE SAW for TILE GLASS MARBLE HOLESAW 3/4", 1", 1-3/16", 1-3/8", 1-5/8" Information
|
The diamond coating on these saws give superior performance and life. Excellent results in glass, marble, slate, and tile. Nickel plated. Segmented design works better and lasts longer. Sizes (Shank diameter: 1/4"): 3/4" 1" 1-3/16" 1-3/8" 1-5/8" Note: To prolong the life of these bits, use on a low speed with coolant (water/oil)
|
|
|
What Customers Say About 5 DIAMOND DUST HOLE SAW for TILE GLASS MARBLE HOLESAW 3/4", 1", 1-3/16", 1-3/8", 1-5/8":
|
|
They take a while but they cut a nice clean hole without breaking the tile. Great product. I used them to cut holes in 3/8" thick porcelain tiles. Make sure to create a plumber's putty berm around the area you are cutting and fill it with water. This will make sure that the saw stays cool during cutting.
I centered my template and secured it with duct tape. The diamond dust saw looked as good as when I unpackaged it.You might note the lack of a pilot bit and wonder how to center your hole.
The job was done neatly and quickly. I used these hole saws on vitreous china.
The carbide saw showed obvious signs of wear. I had started with a carbide grit hole saw, but, after hours of slow progress, decided to purchase these.
The diamond dust hole saw took only minutes to complete the job. I used a small piece of plywood into which I had cut a hole to the size of the diamond dust hole saw I was going to use.
Once the hole was started, I was able to remove the template and continue.Keep a spray bottle of water handy and frequently squirt the saw and material to keep it cool and lubricated.
Great product at the price. I've only tried one of the bits so far but, it worked flawlessly.
|
|
 |
|
|
|
